Pro-Cure X-138 «Slow» (Inhibited) Accelerator additive may be used to decrease dry and cure times in Awlgrip Urethane Topcoats and Awlcraft 2000 Topcoats to 6 to 8 hours (@77°F).
Pro-Cure X-138 may be used in either brush or spray applications. Do not use in Awlgrip primers.
Mixing instructions for Pro-Cure X-138 (73015) for spray or brush applications — 1/2 oz per gallon of mixed topcoat color base + converter. This is the maximum you can add; lesser quantities may be sufficient.
This is equivalent to 6 capfuls if measured using the screw top cap.
There is no induction time after adding and mixing.
Pro-Cure X-138 may be used in either brush or spray applications.
Recoat times — If mixed at full amount, may be recoated or taped in 6 – 8 hours at 77°F and 50% relative humidity.
Drying time/pot life shortening results will vary depending on temperature and the Reducer used – see product instructions.
Do not use when application surfaces are hotter than 105°F or colder than 55°F.
Do not use in primers.
Technical Specifications
| Weight | 1.50 lbs |
|---|---|
| Dimensions (L × W × H) | 12.00 × 8.00 × 4.00 in |
