Inflatable Boat & Dinghy Bottom Coating – Ablative

An ablative antifouling bottom coating especially formulated for inflatables and dinghies.

MDR’s 787 Bottom Coating is a flexible vinyl, water-based antifouling coating containing cuprous oxide for protection against barnacles and other marine growth in fresh and mid-temperature range saltwater.

• It can be used on most inflatable materials including Hypalon, PVC and rubber, as well as on fiberglass or wood dinghies

• Cuprous oxide (Cu₂O) biocide: 26.4% concentration

• Easy to apply by brush or roller. Easy clean-up with water

• No limit on time out of water if the dinghy is hauled

• Inflatables can be deflated and loosely rolled without cracking the coating

• Theoretical coverage: one quart will provide two coats of protection for the average eight to ten foot inflatable – approximately 140 sq ft

• Apply 2 coats; 4 hours between coats at 70&degF; wait 24 hours before launching

• Do not use below 50°F

• Only available in black

Technical Specifications