Micron CF Copper-Free Ablative Antifouling Paint – Green, Gallon

Micron CF is an aluminum safe, copper-free, multi-season antifouling that uses two biocides: Biolux® zinc pyrithione to combat weed growth and slime, and Econea® which specifically targets hard shell fouling such as barnacles and zebra mussels.

The unique Micron synthetic resin binder system in Micron CF provides controlled release of biocides throughout the entire life of the antifouling – without decline. This means the boat will be fully protected from fouling build-up.

Like all ablative antifouling paints, Micron CF works best on boats that move. Like a bar of soap, ablative paints depend on moving water to erode the surface, exposing fresh biocide. The erosion process also polishes the surface and reduces paint build-up over time – reducing friction and improving fuel efficiency.

Micron CF is also a high solids formulation that is VOC compliant — for a more comfortable working environment and reduced emissions into the atmosphere.

Copper-free Micron CF is one of Interlux’s best offerings for aluminum hull boats. It uses a more sophisticated synthetic resin technology than the popular Trilux 33 (also aluminum safe) or the similar, but single-season Pacifica Plus, and provides more consistent protection over the life of the paint.

• Suitable for all power and sail boats – including aluminum

• Sophisticated Micron family synthetic resin binders control the release of biocides so they last the lifetime of the paint

• Bright colors, including white, with reduced discoloration along the waterline

• Predictable performance – suitable for use in all waters (salt, brackish, fresh)

• Can haul and re-launch without re-painting

• No need to scrub

• Fast drying – can often paint and launch in the same day

• Dual biocides: 3.9% Econea; 4.12% Biolux – Interlux’s brand for zinc pyrithione (Zinc Omadine)

• No need to paint every year — paint service life depends on number of coats applied

• Durable coat, yet ablative property minimizes build-up

• VOC compliant

• Can be applied by brush, 3/8″ solvent resistant roller, or airless or conventional spray

• Thinner: Special Thinner Y216

• Theoretical coverage is 518 ft²/gallon; 2 – 3 coats recommended, 3 on bare wood; with extra coat in high wear areas such as chines, rudders, sterngear, and leading edges; 66% solids (by vol.)

Heavy on the technical side…

When applying to an aluminum hull, Interlux recommends a thorough cleaning and degreasing with Solvent Wash 202, sanding with 40 to 60 grit sandpaper, priming with Interprotect 2000E thinned with Reducing Solvent 2316N (1 – 2 coats), and then applying 2 – 3 coats of Micron CF. See Accessory Products.

Refer to the Micron CF Technical Data Sheet for complete details and instructions.

Technical Specifications